PDA

View Full Version : Strobe alarm light



Q'fied
17-06-2009, 03:17 PM
Hi there,
Just recently qualified and have been put in charge of installing a new Carel 'PlantWatch Pro' control system for the revamped supermarket we have done.

My problem is I want to hook up a red light to an alarm relay on the Carel control, though I do not want a solid light. Anyone know of a relay I can get to make it flick on and off like your cars' indicator?

Brian_UK
17-06-2009, 06:57 PM
Just buy an alarm beacon, they are normally 'flashing' not solid light.

Something like these, from the UK RS Components site.

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=flashing+beacon&x=0&y=0

lowcool
18-06-2009, 06:58 AM
brian wins,they even incorporate a screamer not that you have to wire it in the only thing you may need is a power supply,compare what your light requires to rated output voltage of alarm relays.blue is pretty much standard in burglar alarms,have used a few for personel trapped alarms

Brian_UK
18-06-2009, 11:37 PM
brian wins, <snip>
It's only because your post had so much further to travel than mine. :D

Q'fied
19-06-2009, 11:15 AM
Ha - Thanks fellas. Yeah wasn't sure (until this morning) if they came pre-installed with a strobe relay! All good......


Job Done