Stuart59
29-05-2009, 10:36 AM
Hi all,
After a power cut/surge it seesms that our Daikin R410A got reset and during the middle of the night the unit turned off. Initially I believed it had gone off as a result of a another power cut but then it went off at exactly the same tiem the next night. No timer settings appear to have been set and when it does go off it wont come back on via the remote control.
So I go up to the roof and take a look at the outside unit, I cut the power and reconnect and still it won't work. Only way to get it up and running is to press the forced cooling switch on the PCB. Unit then appears to work normally.
Obviously I want to make sure its not going to go off again tonight. I have double checked that there are no timer settings enabled. However the manuals do not sufficiently explain how the forced cooling works? Does it automatically shut off for example and how do I know if the unit is operating in normal once again?
Would appreciate any advice.
Thanks,
Stuart.
After a power cut/surge it seesms that our Daikin R410A got reset and during the middle of the night the unit turned off. Initially I believed it had gone off as a result of a another power cut but then it went off at exactly the same tiem the next night. No timer settings appear to have been set and when it does go off it wont come back on via the remote control.
So I go up to the roof and take a look at the outside unit, I cut the power and reconnect and still it won't work. Only way to get it up and running is to press the forced cooling switch on the PCB. Unit then appears to work normally.
Obviously I want to make sure its not going to go off again tonight. I have double checked that there are no timer settings enabled. However the manuals do not sufficiently explain how the forced cooling works? Does it automatically shut off for example and how do I know if the unit is operating in normal once again?
Would appreciate any advice.
Thanks,
Stuart.