Thermoking MD II SR will not crank?

[truckman]

Have MD II SR that will activate fuel pump, preheat, but will not crank. Any suggestions appreciated. Thanks.

[cadwaladr]

have you hot wired the starter solenoid,make sure the battery is fully charged,if power is good 12volts at panel try jumping wire[2] across to 8s maybe starter relay in panel or bad earth at starter what is the history, has fault just appeared.

[cadwaladr]

by the way your post is in the wrong section,try the transport section

[truckman]

All connections and voltages are good. Looks like a
bad starter, won't energized when hot jumped. Thanks.

[cadwaladr]

All connections and voltages are good. Looks like a
bad starter, won't energized when hot jumped. Thanks.
ok check for corrosion between body of starter and mounting plate.try it on the bench via jump leads,only here to help take care out there.