Blueboy
19-05-2009, 05:53 PM
Has anyone come accross the requiremnt to label VRF 3 pipe pipework and condensate line, if so what labels should be used as per below
Pipe service identification shall be by 300mm long coloured bands,
superimposed on the primary colour and complying with the recommendations of
BS 1710.
Reply's gratfully accepted
Regards Jools:cool:
Pipe service identification shall be by 300mm long coloured bands,
superimposed on the primary colour and complying with the recommendations of
BS 1710.
Reply's gratfully accepted
Regards Jools:cool: