PDA

View Full Version : Alco/Emerson head master/condensor pressure control



liptow
12-05-2009, 05:30 PM
Hello friends of refrigeration,
I've been told that Alco/Emerson is eliminating some "HP" & HPC" head master/condensor pressure control 3-way valves and we are to switch to another brand. Well, I do alot of R134a and Alco/Emerson offered pressure control points at 100psi, 110psi, and 125psi. I only find the alternate source having 100psi. Does anyone know or care about controling the condensor pressure at slightly higher pressures. I would go with the slightly higher pressure if I had a long remote hot gas run for defrost and slightly oversided condensing unit. Thanks, Joe :)

liptow
13-05-2009, 01:50 PM
Thanks for the response,
I believe Sporlan LAC series is only set fopr 100 psi.