PDA

View Full Version : pressuer drop across heating coil



krratheeshnair
07-05-2009, 07:42 AM
can any one tell that how to calculate pressure drop across a coil where no coil data is available.only u have stud valves and measuring port available at inlet and outlet please.

krratheeshnair
08-05-2009, 07:22 AM
can any one tell me how to calculate coil pressure drop if we have flow through the coil .23 L/s,temp inlet for water (80 deg c),inlet air temp (21 deg c),heating coil capacity 16.7 KW, available.

ALLAHHOOPK
08-05-2009, 08:13 AM
Your question is a little complex!
Which fluid is being used across this coil?
What is the temprature of the coil?

nike123
08-05-2009, 10:09 AM
can any one tell that how to calculate pressure drop across a coil where no coil data is available.only u have stud valves and measuring port available at inlet and outlet please.


If you have measuring ports at inlet and outlet than measure pressures and subtract lower reading from higher reading and that is your pressure drop at current conditions.

Or maybe I did not correctly interpreted what you wrote in your question.:confused:

frank
08-05-2009, 08:38 PM
I have merged these posts, that's why you can see the same question asked twice.

Please do not post the same question in more than 1 thread..........you will not get an answer any quicker!