View Full Version : Sourcing a modern equivalent to old USA Copeland compressor
weeksy
06-05-2009, 09:45 AM
Greeating folks,
Any ideas on where I can get details on a modern equivalent for an old USA Copeland R22 compressor.
Old model is REY3-1075-PFV.
So far I've drawn a blank from Copeland Belgium, Climate Centre and Emerson/Copeland USA.
Anyone know a UK supplier than can help me out?
Cheers All,
weeksy.
D.D.KORANNE
06-05-2009, 09:56 AM
I can help you . What is the displacement of the present compressor in meter cube per hour / CFM . What is the evaporation temp & condensing temp ?
operating voltage & frequency
contact me : ddk0123@gmail.com
NoNickName
06-05-2009, 01:08 PM
It's a 17100 btu/hr (5kW capacity) compressor (with R22 at HBP conditions), single phase 220/1 with split capacitor start (330Volts 72-86 mF). The direct replacement shall be RR17K1-PFV. Disclaimer applies.
Peter_1
07-05-2009, 07:27 AM
Boink, NoNickName gave you all you needed I suppose.
weeksy
08-05-2009, 09:51 AM
Well, I've found the p/n on a cross reference sheet and it matches the data Nonickname provided.
Now, who in the UK can supply me one of these?
Cheers,
Weeksy.
NoNickName
08-05-2009, 12:29 PM
Copeland. Who else?
powell
08-05-2009, 06:05 PM
Greeating folks,
Any ideas on where I can get details on a modern equivalent for an old USA Copeland R22 compressor.
Old model is REY3-1075-PFV.
weeksy.
weeksy,
The new number for the REY3-0175-PFV is:
RR17K1-PFV-900
sweat connections
or
RR17K1-PFV-959
rotalock suction/ sweat discharge
includes Cap and relay assembly
weeksy
15-05-2009, 03:46 PM
Cheers for the extra info Powell.
Right....Anyone have any USEFUL Copeland supplier details for the UK other than Clim*te C*ntre :eek:
I'm going round in circles here......
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.