Greengrocer
29-04-2009, 08:05 PM
Well to be more precise - adiabatic or evaporative coolers.
Currently looking at warehose that needs some sort of cost effective ventilation. Trouble is extract vent on its own is not going to cut the mustard. Lots of internal heat gain and even with very high air change rates (60+) the summer temps would stuggle to get any lower than 30-35c.
So they need some sort of cooling. If I add an evap cooler I can reduce the air change rate to around 15 and maintain approx 25c in summer - I think.
Have any of you UK guys had any experience (good or bad) with Breezair or EcoCool models in a factory / warehouse application?
Currently looking at warehose that needs some sort of cost effective ventilation. Trouble is extract vent on its own is not going to cut the mustard. Lots of internal heat gain and even with very high air change rates (60+) the summer temps would stuggle to get any lower than 30-35c.
So they need some sort of cooling. If I add an evap cooler I can reduce the air change rate to around 15 and maintain approx 25c in summer - I think.
Have any of you UK guys had any experience (good or bad) with Breezair or EcoCool models in a factory / warehouse application?