PDA

View Full Version : Cascade cooler for r744 (co2)



Sandro Baptista
26-04-2009, 05:35 AM
What's your feedback, based in the experience of working with cascade refrigerant plants with R717 (high temperature) / R744 (low temperature), in using semi-welded plate R744 condenser of ALFA LAVAL M10 and MK15 or with another brands?

Sandro Baptista
29-04-2009, 09:59 AM
I'll try again :D.


What's your feedback, based in the experience of working with cascade refrigerant plants with R717 (high temperature) / R744 (low temperature), in using semi-welded plate R744 condenser of ALFA LAVAL M10 and MK15 or with another brands?

nh3wizard
29-04-2009, 05:57 PM
I'll try again :D.

I am thinking that no one has anything to comment on this, in the States there are very few of these in use for cold storage warehouses, USCS (United States Cold Storage) is the only company that I know of that uses this type of system.

wholesaler nh3
21-07-2009, 09:36 PM
Hi In sweden we have a ammonia /co2
system with alfanova highpressure
exchanger and it works fine

forget the m10 you must have alfanovas.

Airfrost
22-07-2009, 12:41 PM
+1
Forget M10
Use AlfaRex, Plate and Shell or Shell and Tube

ced
19-01-2010, 11:19 AM
Hello !

Use the Brand "vahterus" !
They have shell and plates heat exchangers for CO2 applicaions : pump / flood etc ... with very high design presure if you Want. In france, we must design a heat exhanger at 50 bars if we use hot gaz for defrosting and the test presure must be at 100 bars. Just "vatherus" can do that. and the cost is very below a Alfa laval model.

Best regards

I can give to you my contact for "Vatherus" if you whant !!