devlin maguire
22-04-2009, 04:53 PM
Hi All
Can any one tell me what if any thing is wrong with this as a recovery procedure
Connect high side hose to liquid line and yellow to to recovery bottle (yellow with black band) on which a vac was pulled open valves as required and let the liquid empty into the bottle then use recovery machine for the remaining vapour I have been told I will not get an accurate pressure reading at this stage and it may be at a higher pressure than the bottle will safely handle , although I thought that this was not important as I always use the bottle is on a scale for quantity check. I think Iam being told a whole heap of fertilizer, also this is not large scale equipment as mostly I am invoved in catering and retail applications at 2 to 3 kilo of refrigerant. also why do I need an bottle with a liquid float sensor to alert an 80% fill
Thanks Dev
Can any one tell me what if any thing is wrong with this as a recovery procedure
Connect high side hose to liquid line and yellow to to recovery bottle (yellow with black band) on which a vac was pulled open valves as required and let the liquid empty into the bottle then use recovery machine for the remaining vapour I have been told I will not get an accurate pressure reading at this stage and it may be at a higher pressure than the bottle will safely handle , although I thought that this was not important as I always use the bottle is on a scale for quantity check. I think Iam being told a whole heap of fertilizer, also this is not large scale equipment as mostly I am invoved in catering and retail applications at 2 to 3 kilo of refrigerant. also why do I need an bottle with a liquid float sensor to alert an 80% fill
Thanks Dev