Xarious 350 pin kit fitting ?

[manxaircrest]

Hiya everyone have little carrier equipment here however one that i do have is a xarious 350.... it had one of the evap fans fail and i have replaced same, however on the test it was not running, talked to carrier technical and they, rightly, suggested the two pins on the 58 way plug to the microprocessor, the offending 26 & 56 pins (numbers may not be accurate while ago now?) anyway question is anybody have experience of changing the "pin kit" is it as fiddly as it looks in its plastic bag on the passenger seat of the van ?

Cant help but wonder as to why a fuse isn't in the circuit must be easier, but not so good for the overtime eh ? :rolleyes:

Cheers and all the best Brian

[cadwaladr]

dont do it there is an easier way to repair it post your email and i will reply to it

[clivemtk]

why not tell us all

[cadwaladr]

in reply to clive did not want to post how to do it because i only do it to units that are used local to me ,my repair would render the micro not interchangeable,and i dont want to be responsible but it is simple to do,when a village gets busy with traffic .ie overloaded they bypass it ,if you understand

[cadwaladr]

hi clive out of interest are you ex mtk warrington if so yeehah

[clivemtk]

right first time

[cadwaladr]

just wondering did you have any success by the way clivemtk are you still at mtk how high up the ladder /catch you later

[manxaircrest]

Hi sorry ..... my email is aircrest@manx.net .....

Cheers and interested in the reply already !! ??

Thanks in advance

Brian

[cadwaladr]

Hi sorry ..... my email is aircrest@manx.net .....

Cheers and interested in the reply already !! ??

Thanks in advance

Brian
d
did you get the email and did it help, hope so