View Full Version : Hotpoint FF187EG
duggied
12-04-2009, 04:39 AM
Hi everyone new to site, need help on hotpoint FF187EG switched power on, power going to circuit board, nothing working, checked compressor fine, checked capacitor, fine, checked thermister/thermostat, they are ok, checked klixon, this is fine, board doesnt smell or look burnt, looks fine.
No LED to show unit is on, do anybody know what is going on
Thanks
Duggied
amitsaxena
12-04-2009, 04:51 AM
There is a possibilty that the unit is under defrost mode, Hence let the unit run for 1 hr and then check that the unit runs normally.
Thanks
Amit
duggied
13-04-2009, 03:41 AM
thanks amit i will try this
duggied
16-04-2009, 08:04 AM
Hi, Tried this and it did not work, do you have any other suggestions. Thanks
amitsaxena
16-04-2009, 08:43 AM
Dear Check for the fuse on the board if it is gone then nothing will work. As you are confirming rest all part are working OK, then check
1. Main power supply board
2. Fuse on the PCB card
thanks
amit
tonyelian
17-04-2009, 07:57 PM
hi
there is 3 sensor in ur fridge one for cabihet second for freezer third forthe defrost termination attached to the pipe in freezer comartiment i suspect the last option
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.