PDA

View Full Version : whirlpool k20



jack smith
12-04-2009, 01:23 AM
i have a whirlpool k4o that wont seem to go on hot gas, the wiring diagram is rubbed off and all wiring is solid with dust. unit about 15 years old. looking at it i think that when ice thickness stat is open it breaks the neutral from the pump sending a live feed to the water inlet sol and hot gas sol. but when ice thickness becomes open circuit nothing is happening. I could be wrong about the wiring. HGS and WIS are not getting a supply when ice stat becomes open any help appreciated

Brian_UK
12-04-2009, 11:33 PM
You may find this link some help although no guarantees :)

http://www.truetex.com/icemachine.htm

jack smith
18-04-2009, 01:04 PM
thanks brian

bernard
18-04-2009, 09:46 PM
Try

http://www.truetex.com/icemachine.htm

Regards Bernard