PDA

View Full Version : custom design project







jamieelliott
01-04-2009, 11:03 AM
Hi, I am a design student, who is looking for help to make a cold plate. I want to make a steel plate 100cm/50cm with copper pipe running the underside, then connect this up to a domestic freezer system (from an old freezer). This should make a working cold plate, should it not? I want it to be cold enough to form condensation from the air.
Any info on who could help me or where i can already get such a thing, would be appreciated. I have a very limited student budget, so any favors i can grab , would be seen as a great help.

thanks
jamie

US Iceman
02-04-2009, 01:39 AM
please only post the message in one location. Multiple posts will not generate responses any faster and it eats up space on the server.
Thanks.

josei
16-04-2009, 05:16 PM
Hi Jamie :



Could you explain more specific details about your student project.

Are you planning or calculating load of system based on desired working conditions , type of refrigerant, local temperatures, etc. What conditions and knowledge do you have about.


Or is only a technical application work using refrigeration equipment?
Please let us know more, so we can help!