multisync
28-02-2009, 03:40 PM
Got sent to look at an old VRV.Access is a real mare
I could see one outdoor (couldn't see tag as it had ducting on top).
One indoor unit a 125 ?
a possible indoor unit behind a panel -just in/out grill visible
a refnet joint with the legs valved off.(looked from new)
Are we right in thinking a VRV I HAS to have at least 2 indoors on the system from new to work?
If so that means there must be a unit behind the grilles and it's own refnet further on. If not then the unused refnets could have been for this unit but not fitted in the end.
I wasn't allowed tools to check on the outdoor and we don't have a checker either.
I could see one outdoor (couldn't see tag as it had ducting on top).
One indoor unit a 125 ?
a possible indoor unit behind a panel -just in/out grill visible
a refnet joint with the legs valved off.(looked from new)
Are we right in thinking a VRV I HAS to have at least 2 indoors on the system from new to work?
If so that means there must be a unit behind the grilles and it's own refnet further on. If not then the unused refnets could have been for this unit but not fitted in the end.
I wasn't allowed tools to check on the outdoor and we don't have a checker either.