PDA

View Full Version : FES Micro III







duke717
18-02-2009, 01:19 AM
Hi guys, long time reader here, not much of a poster though. Anyone here have any manuals on the micro III panels. I am starting to run into a few of these. I have literature on the micromaster and the micro II. The company has a manual, but I like to read through things at home sometimes.

Thanks

US Iceman
18-02-2009, 01:00 PM
While I do not have any manuals on these there is some information I can share with you. I received a letter from GEA/FES yesterday stating they were going to retire the Micro II & IIE processor boards. Once the surplus stock is gone from inventory you will be limited to repair of the existing board or upgrade to a new control panel.

josef
18-02-2009, 08:11 PM
http://www.genemco.com/catalog/pdf/NFES02microIIIcontrolcompressor.pdf

http://www.genemco.com/catalog/pdf/HDCF200Afescontrolpanelliterature.pdf

duke717
20-02-2009, 10:47 AM
Thanks Iceman, I figured that would be coming but I had not heard anything about it yet.

duke717
20-02-2009, 10:51 AM
Thanks Josef, I saw that info on the website. I am looking for the IOM's.

roadienh3
20-02-2009, 10:19 PM
The Micro III manual is generally embedded within a compressor or control panel manual, which have been provided to end users on CD for several years now. Find a client with a CD for a compressor package and it'll have what you're looking for. Good luck!