evoporator/dehumidifier

[mkpo]

Hi all,

I am trying to design inline/staggered evaporator coil (plane fine on tube type) that can be used for both latent and sensible cooling of air. Anyone has a detail guideline-programme for both heat and mass transfer that can be run in EES or coolpack?

Regards
Martin

[S.M.Gokhale]

Hi
I don't have a software but have successfully designed, installed and commissioned an evaporator/dehumidifier to cool air from 32 Deg. C DB 28 Deg. C WB to 2 Deg. C dew point. This was a plate fin type evaporator and a very deep coil. You can PM me with a more specific query
Regards
SMG