PDA

View Full Version : Inpac system....help..



symon22
05-02-2009, 03:00 PM
Can anyone please help.
i have been asked to look at an invoid inpac 3.5 system . it has a seperate electric heater box installed on the air supply into the room . the diagram suggests that the heat wire (not 4-way valve supply) is to be fitted to the heater element contactor to switch on its own supply , no problem.

the question is that i have been told that this only supplies for a short period of time

if anyone knows of any info/contacts i would be thankful....

the system is 120 miles away from base so i would like to maximise my time on site productively rather than sat working things out as we all do...

Brian_UK
05-02-2009, 09:34 PM
Seems like an Israeli unit :(

Their website doesn't help much but it might be worth trying their 'contact' page...

http://www.pereg-ac.co.il/index.php?sid=535&lang=en&act=contact%20us&comments=Additional+Information+Request%0ACategory%3A+INPAC%0ATitle%3A+INPAC-3.5%0A

frank
05-02-2009, 09:52 PM
Seems like an Israeli unit :(



I was waiting for the punch line :D

Brian_UK
05-02-2009, 09:55 PM
I was waiting for the punch line :DSorry Frank, I still can't think of a decent one ;)