View Full Version : master/slave
chichi
04-02-2009, 06:14 AM
Hi memebers
Could anybody lead me that how i must to do communication between two or more grasso screw compressors with simens plc
Kh1971
04-02-2009, 08:29 AM
Hi,
Please visit there web site and try to collect some data
http://www.grasso.nl/en-us/Components/Screw%20Compressors/Pages/default.aspx
chichi
04-02-2009, 08:39 AM
thanks for your link but i can't find any things.
nike123
04-02-2009, 09:05 AM
thanks for your link but i can't find any things.
http://docnav.grasso-global.com/DocNav_Eng/Index_e.html
Josip
04-02-2009, 07:13 PM
Hi, chichi :)
welcome to RE forums...
Hi memebers
Could anybody lead me that how i must to do communication between two or more grasso screw compressors with simens plc
Maybe to ask this gentleman about your problem...
For more Information
Jeroen Schellekens (jschellekens@grasso.de)
Manager Automation Department
Tel.: +49 30 4...
E-mail. Jeroen.Schellekens@GEAgroup.com
---
http://www.grasso.nl/en-us/Components/Controls/Pages/default.aspx
N.B.
Which kind of compressor controller/s you have installed now?
Best regards, Josip :)
chichi
05-02-2009, 05:57 AM
Hi Josip
I work on Grasso screw compressors and grasso screw compressor is controlled by GSC.(Grasso System Control) that is based on the Simatic C7-633 system
Kind Regards
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.