Double07
30-01-2009, 01:50 PM
I am having Ture milk boxes kill over on me on a regular basis now. The problem I am experiencing is the cap tube is clogging up. I recently began replacing the spun drier with a sporlan capt-32. My reasoning was this drier would do a better job and it seemed to be working but now I have another cap tube stopped up yet again.
Why do these boxes suck so bad???!!!! We have alot of True equipment and I haven't had any trouble out of anything except these stinking R134a milk boxes.
So what would be the best solution? I was considering putting a TXV in but I'm thinking that it may get obstructed as well. My other thought was to convert over to 414B.
I have discussed this with some people and they have expressed that if the condenser gets dirty and the head goes out of sight then you can experience the problems that I have. I made a point to keep the condensers sparkling clean so what am I to think the problem is besides piss poor design?
Why do these boxes suck so bad???!!!! We have alot of True equipment and I haven't had any trouble out of anything except these stinking R134a milk boxes.
So what would be the best solution? I was considering putting a TXV in but I'm thinking that it may get obstructed as well. My other thought was to convert over to 414B.
I have discussed this with some people and they have expressed that if the condenser gets dirty and the head goes out of sight then you can experience the problems that I have. I made a point to keep the condensers sparkling clean so what am I to think the problem is besides piss poor design?