conair chris
29-01-2009, 10:59 AM
The tool in question needs to have a flexible shaft (approx 160mm in length)
screwdriver type handle and changeable heads preferably
the head socket has to have an outside diameter of 12mm or less
needs to have 8mm ''nut spinner'' head
and to make this even more bizarre...
a 2.5mm hex/allen key head ideally
(a compromise to the hex would be the equivalent torx)
it is for a range of equipment with hard to access points
ideally all in one tool
but can be 2 separate tools
please help
any suggestions or advice would be greatly appreciated :rolleyes:
screwdriver type handle and changeable heads preferably
the head socket has to have an outside diameter of 12mm or less
needs to have 8mm ''nut spinner'' head
and to make this even more bizarre...
a 2.5mm hex/allen key head ideally
(a compromise to the hex would be the equivalent torx)
it is for a range of equipment with hard to access points
ideally all in one tool
but can be 2 separate tools
please help
any suggestions or advice would be greatly appreciated :rolleyes: