PDA

View Full Version : York reciprocating chiller YCAJ



soapboxdriver
26-01-2009, 08:51 PM
Hey...

I have been searching everywhere for a o&m manual for a York air cooled reciprocating hermetic chiller YCAJ220. What i need to find out is the minimum gpm flow. Is there anyone who can lend me a hand?

Thanks in advance.

Brian_UK
26-01-2009, 09:20 PM
All I could find was a maximum flow rate, sorry.

4gpm 15.2l/m

Grizzly
26-01-2009, 11:02 PM
Hey...

I have been searching everywhere for a o&m manual for a York air cooled reciprocating hermetic chiller YCAJ220. What i need to find out is the minimum gpm flow. Is there anyone who can lend me a hand?

Thanks in advance.

Hey Soap!
I seem to have the same page as Brian.
Basically anywhere near say 2 gallon/ second or 2 psi (14 kpa approx) and you are on the bottom of the graph.
I would of posted the relevant page only it's size prevents this.
Which I suspect Brian already knew.
Good Luck Grizzly

al
27-01-2009, 03:05 PM
was there qan issue some time ago with evaps built in mexico?? flow rates in the mqnual were wrong:D

may just be the alzheimers though......

al

al
27-01-2009, 03:06 PM
how do the french type on this keyboqrds??

al:off topic:

Grizzly
27-01-2009, 03:46 PM
was there qan issue some time ago with evaps built in Mexico?? flow rates in the manual were wrong:D

may just be the Alzheimer's though......

al

Built in Mexico, Tested in a puddle!
They used to leak apparently?
Never heard anything about reduced flow.

Oops! Sorry I am reliably informed that they were built in Basildon That means they were well made!
Hence why there are still so many about.
:D grizzly