Samsung AQV12VBAN - switching from Fahrenheit to Celsius

[palica]

Hi Everybody,

I have a Samsung Vivace AQV12 which displays temp in F. I simply want to change the display to C degrees. There is nothing about it in the user manual. Anybody can help?

Thank you

Fred

[superswill]

do you have a hard wired remote controller or infer red?

[palica]

I have the infra-red remote delivered with the unit.

Fred

[superswill]

I have the infra-red remote delivered with the unit.

Fred

ok leave it with me,i have checked all manuals and cant find anything,will ask the question

[palica]

Thank you Paul, much appreciated.

Fred

[superswill]

OK,where is the unit displaying the temp in F?

on the indoor unit blue LED display or on the remote control?

[brian02]

i think you cannot changed the display to C
due to F is the default in the micom

You can only set in the remote is the option codes of the unit, temp setting, MPI etc..

[stefs_cruiser]

With panasonic's you hold the up or down arrow down for 10 seconds
Maybe just try holding one of the buttons down for 10 seconds....

[palica]

OK,where is the unit displaying the temp in F?

on the indoor unit blue LED display or on the remote control?
Sorry for my late reply, I was on a business trip.

Both the display on the unit and the remote are displaying the temp in F. I do not mind about the remote (I can probably buy one in C) but the display on the unit is annoying.
I have tried several key combination (including "up" and "down" key) but my guess is that if it would be that simple, Samsung would probably publish it in the user manual.

Do I need to change an EPROM or something in the electronics or can it be changed in the factory settings?

Fred

[palica]

Bump. Anybody knows?

Thank you

Fred

[superswill]

from as far as i know this unit has rolled out of the factory in F and cant be changed,have asked the UK team and they are scratching there heads but if i know more i will ask