View Full Version : Frick TDSH 233L
Hi Guys
Could someone give me the allowable axial and radial end play for this machine.
Thanks in advance
J.D.
josef
14-01-2009, 01:01 PM
Radial?:eek:
I'm testing the end play due to some seal problems in the machine. So I need to check the Up, down and side to side movement as well as in and out
keepitcool
14-01-2009, 04:49 PM
I think if it moves side to side you might be in trouble...
Grizzly
14-01-2009, 06:26 PM
J.D.
Email me.
I may be able to help?
Grizzly
Hello jd the end play is .025"/.039" on frick tdsh 233, any other problems ,let us know might be able to help
Thank you for all the input
Bart Nabbe
06-02-2009, 11:05 AM
Hello J.D.,
If you have a leaking seal, did you check the allignment of compressor and motor?
We use laser allignment to check. That often work to avoid seal leakage.
Greets,
Bart.
koel goeroe
06-03-2009, 11:33 PM
Hi, Can anybody tell me if there is a type FRICK compressor PDSH 355L?
I know TDSH 355L exists but can't find anything on PDSH
Thanks in advance
josef
07-03-2009, 07:58 PM
Koel Hi, I know just TDSH, TDSB, GDSH 355 and TDSL, GDSL 283
Frickman
29-07-2009, 08:04 AM
Yes there is a PDSH its a specical compressor for the YPS devison of frick. They are cast steel machines instead of cast iron.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.