PDA

View Full Version : Frick TDSH 233L



J.D
14-01-2009, 01:37 PM
Hi Guys

Could someone give me the allowable axial and radial end play for this machine.

Thanks in advance

J.D.

josef
14-01-2009, 02:01 PM
Radial?:eek:

J.D
14-01-2009, 02:44 PM
I'm testing the end play due to some seal problems in the machine. So I need to check the Up, down and side to side movement as well as in and out

keepitcool
14-01-2009, 05:49 PM
I think if it moves side to side you might be in trouble...

Grizzly
14-01-2009, 07:26 PM
J.D.
Email me.
I may be able to help?
Grizzly

GHAZ
14-01-2009, 08:58 PM
Hello jd the end play is .025"/.039" on frick tdsh 233, any other problems ,let us know might be able to help

J.D
15-01-2009, 01:27 AM
Thank you for all the input

Bart Nabbe
06-02-2009, 12:05 PM
Hello J.D.,

If you have a leaking seal, did you check the allignment of compressor and motor?
We use laser allignment to check. That often work to avoid seal leakage.

Greets,

Bart.

koel goeroe
07-03-2009, 12:33 AM
Hi, Can anybody tell me if there is a type FRICK compressor PDSH 355L?

I know TDSH 355L exists but can't find anything on PDSH

Thanks in advance

josef
07-03-2009, 08:58 PM
Koel Hi, I know just TDSH, TDSB, GDSH 355 and TDSL, GDSL 283

Frickman
29-07-2009, 08:04 AM
Yes there is a PDSH its a specical compressor for the YPS devison of frick. They are cast steel machines instead of cast iron.