mitsubishi auto restart

[philjd26]

hi
two mitsu electric splits connected too one controller, what dips do i hit to enable auto restart???

rgrds phil

[marc5180]

Hi Phil, if i remember correctly im sure it is sw1 dip sw 9 on indoor units or pull the controller apart and check dip switch SW3 inside the controller. Should be in on position for auto restart.

[Thermatech]

If the units are Mr Slim R410a models
Outdoor unit model PUHZ RP_ _ _

then

Power failure auto restart can be set at outdoor unit SW5 No2

or

Remote controller engineer mode fuction mode 01 setting No2

[philjd26]

thanks for reply lads lads, its old enough 407c maybe late 90s...

rgrds phil