PDA

View Full Version : york chiller


keno432
07-01-2009, 01:26 AM
chiller runs fine no display is it just a bad lcd display
ChillyWilley
07-01-2009, 05:45 AM
Check ribbon cables from display to the microboard. Make sure connections are all in sockets tight. Odds are you have a backlight out. Just to get by, you can use a flashlight to shine in the screen, and you should make out the display. Pay attention to the part number on the side of the display mounting plate when ordering replacement parts. So that you receive the appropriate items for your display.


Regards
ChillyWilley
keno432
07-01-2009, 12:27 PM
Check ribbon cables from display to the microboard. Make sure connections are all in sockets tight. Odds are you have a backlight out. Just to get by, you can use a flashlight to shine in the screen, and you should make out the display. Pay attention to the part number on the side of the display mounting plate when ordering replacement parts. So that you receive the appropriate items for your display.


Regards
ChillyWilley
i will check that to day thanks will get back to you.