View Full Version : Heat Load Calculation and Sizing of Commercial Refrigerators
amitsaxena
30-12-2008, 07:40 AM
Dear All,
I am new to this forum, I need help in calculating the heat load of a commercial refrigerator in transient mode and also the sizing of the components. If anyone can guide i will be highly thankful.
abet_meneses
30-12-2008, 01:29 PM
amitxasena;
so many refrigeration load calculations,copeland,bitzer,russell and many more.
regards,
amitsaxena
31-12-2008, 05:05 AM
abet,
Can you suggest any free download, which u have tried earlier.
nike123
31-12-2008, 10:42 AM
abet,
Can you suggest any free download, which u have tried earlier.
This (http://www.keepriterefrigeration.com/calcrite/RTcalc1.htm) is good one!
srini742
31-12-2008, 11:56 AM
Wish you all happy new year
amitsaxena
19-01-2009, 09:55 AM
Dearnike,
I tried the KeepRite Calc, for heat load calculation but i am facing problem while selcting the condensing unit. Can you help me out.
My unit parameter are as below
Heat Load: 1500 BTU/H
Condensing Unit Amb: 95F
Box Temp : 77F
Design TD : 15F
Supply: 200-240V 50Hz
Help me.
nike123
19-01-2009, 06:35 PM
Dearnike,
I tried the KeepRite Calc, for heat load calculation but i am facing problem while selcting the condensing unit. Can you help me out.
My unit parameter are as below
Heat Load: 1500 BTU/H
Condensing Unit Amb: 95F
Box Temp : 77F
Design TD : 15F
Supply: 200-240V 50Hz
Help me.
What is your problem? By supplied data, I only could say that you need more data for proper calculation.
That is not enough data for refrigeration engineer to calculate anything usable.:eek:
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.