thermoking software

[lool]

can someone give me tk software because I want to make a data download and I can't. :confused:

Thank You !!!

[reefermechanic]

can someone give me tk software because I want to make a data download and I can't. :confused:

Thank You !!!


Hi Lol,

You send me your e-mail adress.i will send you...Also do you have got connection cable?I asked you that because you will need special connection cable.(RS232)

Best regards.

Reefer Mechanic..

[lool]

try send it to florea@delatreid.ro or traian_flo@yahoo.com

brgds and thank you

[lool]

by the way, I have data cable that works with carrier and daikin reefers. I think that works with t.k. too (I never looked at those one's because I didn't had the software ;)) )

[reefermechanic]

Hi Lool,

I did sent you below mationed.

TK SmartSponge Installation Instructions.pdf (http://www.thermoking.com/InfoCentral/Marine%20Solutions/Container%20Software%20Updates/TK%20SmartSponge%20Installation%20Instructions.pdf)

TK SmartSponge Software V1.2A (Full Install).exe

User manual for Thermo King SmartSponge Software.pdf

Best regards.

Reefer mechanic..

[faruq]

Hi all,

I am new in RE.I work as reefer technician.
can some one give me TK software for reefer container?

[reefermechanic]

Hi Farug

You send e-mail.

serkan.humasalar@ardep.com.tr

See you

reefer mechanic.

[faruq]

Hi reefer mechanic,

I have try get data from a unit and successful.Thanks a lot

[andreiortan]

can you send the software at andreiortan@yahoo.com thanks

[artur_stanczuk]

can you send the software at artur_stanczuk@interia.eu thanks

[ccaarriinn]

Can you send the software at carin_yo@hotmail.com thank you, also where can I get the cable that is needed (rs232)??
Thanks

[SparkyRoger]

I learning about reefer is it possible that I can also get a copy of that software. email is gillelectrical@gmail.com

thankyou

[frigolaki]

Hi reefermechanic
is it possible that I can also get tk. software email is frigolaki@sbb.co.yu

[reefermechanic]

hi Sparkyroger,ccaarriinn,artur,andreiortan,

I did send e-mail your adress...

Reefer mechanic

[foil]

Hi, can you send me too?

Thnx.

[metricwrench]

HI Reefer mechanicReefer.
Do you think your good will could send me link for TK software?
Thank very much
my email= shadow@harleydeals.net

[YaroS]

Hi guys. I just wouldnt like create a new thread and will be very appreciated for any help with marine reefers communication software. Actually i need almost all:cool::
1. DataLine any version for Carrier Units.
2. Daikin Container Communication System (DCCS v.5.0)
3. Thermo King SmartSponge Software as Reefermechanic mentioned before (thank you in advance) :).
A little about me. Im ukrainian ships electrical engineer on one of the Maersk chartered vessels and how you know im responsible for reefers on board when vessel at sea. Currently we are in China and i caring more then 650 boxes :rolleyes:, some of them dangerous cargo (tanktainer with two free-standing reefer systems and emergency generator).
If some one need i have big collection of manuals in pdf format for most of existing marine reefer boxes and StarView software for StarCool reefers.
Waiting for yours help on e-mail: natayar@ukr.net
PS: How i mentioned above currenly im on board and i would reply as soon as it possible if someone interested any manuals or StarView.
Thank You & Best Regards.
YaroS

[mitya69]

me two pls the software at mitya69@msn.com

[cyberk2]

May i get the software too? where can i buy the cable needed to access a thermoking unit?? k2_lundin@hotmail.com or kristofer.lundin@gavlenet.se

[abbsnowman]

It would be a full time job emailing all you guys. lol

[amitsaxena]

Can you send the software at er_amit_iitd@yahoo.com (er_amit_iitd@yahoo.com) thank you,

[SparkyRoger]

Hey Reefermechanic. thankyou for the software. Also does this software do all the TK Reefers or just some.

[Seban]

Can you send the software at pasqual@poczta.onet.pl THX

[foil]

Can you send the software to me too marko@foilpoint.ee Thank you

[yo9htz]

Hi, may I have a copy of this software, also. I can provide any information about Carrier units...

[yo9htz]

Hi, may I have a copy of this software, also. I can provide any information about Carrier units... I forgot the email: yo9htz@gmail.com

[Diego-Santiago]

Hi Reefer Mechanic,
Is it possible that can you send the software at dieroiba@hotmail.com ??

Thank you very much.

Best regards.

[Dave1]

Hi Reefer Mechanic

If you could send the above to me would be gratefull teudave@live.co.uk

Thank's Dave

[abbsnowman]

Moderators, please nuke this post so the begging will stop!

[Robbie1]

It would be a full time job emailing all you guys. lol
hi. would it be possible to get the software to make a download from a thermoking refer trailer please?
Many thanks email address is rob1eddy@tiscali.co.uk

[govind]

"HI Reefer mechanicReefer.
Do you think your good will could send me TK software too?
or would u please post it up at 4shared.com
a site for free download
do convert exe to zip first

my mail id : majestic.govind@gmail.com
regards
govind"

[Polaris]

Hello Reefer mechanicReefer,
Can you please send me TK sofrware?
Best regards!

[pham tien]

Hi! Reefer mechanicReefer,

Can you send the software at pacificocean (er_amit_iitd@yahoo.com).info@gmail.com thank you,

[reefermechanic]

Hi All,

I was send a download programs to somebody in here..But everybody wnats to me again again...Sorry..I dont have time for this:)))Your have to want other guys:))

All the best:))

Reefer mechanic.

[abbsnowman]

Hate to say it but I told ya so.
Keep the requests to one at a time guys. We are doing what we can but also have lives to live!

[Edvin]

Hi I'm from Latvia and I'm trying to find software that would work with TK trailers, if someone could help me I would be very pleased. Thank's

[Edvin]

Forgot(silly me) - edvin@zb.lv

[bmanu]

hello! How can I get the software for tk unit`s

[bmanu]

I forgot the email: yo9htz@gmail.com

salut poti sa ma ajuti si pe mine cu softul de tk

te rog mult

[abbsnowman]

ok seriously mods, get rid of this thread. This is rediculous. We are trying to help some people and getting swampes with begging. Come on help us out here!!!
Stop asking for books etc. guys. How about you offer some help yourselves? Geeese your like parasites!

[nickzarin]

Hi Reefer Mechanic ,Can you send me too.
nickzarin@gmail.com

[absolute-zero]

Damn this thread is out of control, I could really start some trouble by saying the smart sponge 1.2 is outdated and hardly ever used anymore.

TK uses differnt versions of software now for marine and truck trailer like wintrac 4.8.1, and York Logman PC software. :eek:

Carrier uses Dataline for marine and reefermanager for truck and trailer. :eek:

Back to the drawing board I guess.

A-Z

[jday_michel]

the program has some of the carrier
thanks
ReeferManager.exe

[jday_michel]

mcnc6@msn.com

[incar]

Hi ,
Is it possible that can you send the software at stefano.crescenzi@gmail.com (dieroiba@hotmail.com) ??

Thank you very much.

Best regards.