PDA

View Full Version : York CX-TDC9E chiller controller



iceman007
05-12-2008, 05:34 AM
Hi.

Does anyone have a manual for the York CX-TDC9E terminal controller. I used to have but seem to have lost it. We have a YRK machine which will not unload and this controller seems to be the problem.

Thanks

Grizzly
05-12-2008, 10:09 PM
Hi.

Does anyone have a manual for the York CX-TDC9E terminal controller. I used to have but seem to have lost it. We have a YRK machine which will not unload and this controller seems to be the problem.

Thanks

Iceman.
It may sound stupid but I thought York equipment codes were either 2 or 4 letters.
Unless it is a Unitary product and that's a different Story!
What type of chiller is it?
Cheers Grizzly

iceman007
05-12-2008, 11:56 PM
It's an old R11 centrifugal machine (can't remember YK YRTK or something)

I need literature for the terminal controller.

Grizzly
06-12-2008, 07:34 AM
It's an old R11 centrifugal machine (can't remember YK YRTK or something)

I need literature for the terminal controller.
I have just read your reply.
But as I am off to work.
I can't do anything right now.
So when I get back I will have a look through my paper archive, as it is that old!
This is pre Millenium panel I presume?
Grizzly

iceman007
06-12-2008, 11:44 AM
Yes it's pre Millenium, probably mid 1980's and it is probably one of the older turbo machines.

Thanks

Grizzly
07-12-2008, 08:16 AM
Sorry Iceman,
My first look into the paperwork has drawn a blank,
I will have another look tonight as work calls again.
Maybe someone else can help?
Grizzly

salam
23-01-2009, 07:43 PM
where can i check for refrigeration capilary tube sizes for depodn up on ton pls replay

rakesh06
06-03-2009, 06:30 PM
hi i think . i has the booklet in work . what u want to know about the chiller ?