PDA

View Full Version : Eliwell ID961E & 985E controller



SPBDASAN
28-11-2008, 09:21 AM
hi
I am doing HVAC electrical design
Currently we are using Eliwell thermostat controller with local display on the control panel. We want to monitor the temperature remotely also .Can anyone suggest me in this case. What is the model of the controller, which have both remote and local temperature displays? We need it very urgently since we are going to use for all the upcoming projects.
I heard ID961E&ID985E are suitable model for it. but these models are newly arrived. can any one tell me can we use this model? if we use this model is it reliable or not?

nike123
29-11-2008, 11:30 PM
You need thermostat controller with Televis (http://www.invensyscontrolseurope.com/NR/rdonlyres/C9C0AC30-2D98-4AB1-9C44-D1056D68D868/0/EWTDfamilyandtelevissoftware_eng.pdf) integration for remote supervision and control. That is IC961 LX (http://www.invensyscontrolseurope.com/InvensysControlsEurope/en/ProductsServices/Eliwell/UniversalControllers/ICCont/IC961.htm)
and IC985 LX (http://www.invensyscontrolseurope.com/InvensysControlsEurope/en/ProductsServices/Eliwell/ElectronicRefrigerationControllers/DigifrostLine/ID983-985LX.htm)

SPBDASAN
01-12-2008, 05:28 AM
hi Nike,

I don't want control by remote, just want to know remote display only. pls refer the attached file

nike123
01-12-2008, 08:10 AM
hi Nike,

I don't want control by remote, just want to know remote display only. pls refer the attached file

Than that is OK! Eliwell is prety much reliable!