Sporlan Sight Glass

[licencetochill]

Hey lads,

I have about 45 Sporlan See all 1'' 3/8 ( Model ac-20)sight glass's to fit to some liquid lines on a big job here, they are the 2 piece type(drill a hole in the pipe, braze the body on and screw the glass in). what im wondering is do they need an 'o' ring or teflon seat of some sort.. they were not supplied from our factory with them but i feel this is a bit strange..

any info would be great

JS

[monkey spanners]

I don't know. Why not phone sporlan or it might be parker now as i think they have been bought out and ask thier technical guy. I've found them to be very helpful.

Jon

[littleyapper]

most sporlan stuff use what they call a knife edge seal . no need for gaskets but the torque for tightening is important

[absrbrtek]

You beat me to it. Heres a link for Sporlan's stuff. http://sporlan.jandrewschoen.com/
most sporlan stuff use what they call a knife edge seal . no need for gaskets but the torque for tightening is important

[Brian_UK]

Being beaten to it some five months after the original post, nah - don't worry about it ;)