CDK Controls

[David PS]

Has anyone any info or a manual to program a CDK Miniscan.

What we need to do is rename inputs, alarm setpoints etc.

Thanks

David

[Mark]

Hi David :)

Can you first verify its a miniscan.

regards mark:)

[tonydeith]

Hi david

you could try cdk website, www.cdk.co.uk
They are pretty helpfull and are good with supplying information on their products. On our sites we only use mark 1 & 2 storescans.

[WebRam]

and mark 3 Tony ;)

[Mark]

Hi David ps:)
Cant say i have heard of a miniscan ,However the Storescan mk1,2,3 all have very easy to use configuration screens.
Renaming inputs will need to be configured by CDK any store legend changes graphic lay outs etc all done by lap-top.

The alarm settings are easily accesible via fitting program key in front door of panel,Press menu a number of sub- headings will appear ,scroll to configuaration,then system configuration,enter stub or case number by scrolling through LT1,2,3 etc until desired stub reached this then allows alarm threshold to be adjusted.
When you leave the screen by pressing menu until store map is shown in the left hand corner it should show data save active in red for a short while.
Any changes can be viewed by pressing menu and display events this will show any changes which have occured within the panel.

hope this helps if not ask again.:)

regards mark:)

[David PS]

My mistake, its actually a Microscan.

David

[Mark]

Hi David:)

Im sure the config is the same as storescan if you want to check give Mark or Ian in technical a ring (01260)296300 im sure he will be happy to help.

Regards Mark:)

[Ian_Eb]

Microscan is really easy to program.

There is a switch in the centre of the board on the inside of the door. Flick it to the opposite position and then follow the steps. Or as Mark said, ring (01260) 296300 and we can get a manual out to you.

Ian

[Mark]

Hi :)

Is that Ian from CDK???? :confused:

Dare i hazard a guess :D

[Ian_Eb]

Is that Ian from CDK???? :confused:

Dare i hazard a guess :D

Hi,

How did you guess :D

Not looked in here for months, and then I find 2 vaguely relevant threads at the same time.

Ian

[Mark]

Ian i missed the introduction :D

[Ian_Eb]

Hardly :)

I didnt exactly jump up and down, shouting "Here I Am" :) I sort of sneaked in here, all quiet like :D

[Mark]

Ok Ian thats fine :D

I will be e-mailing you for some technical info in the future ;)

Im sure you love the supermarket forum in this site :D

Kind regards mark.

[Mark]

Hi,Ian :)

What feed back have you had about the storescan 4 when used in conjunction with external alarm monitoring ;) .
My opinion at the moment is mixed :cool: