View Full Version : Henry Ball valves
Hi all:)
Anyone experienced a high number of leaking Henry Ball Valves ,not older ones but new ones installed to spec .
The valve is recognised to leak from the stem of the valve ,therfore the only form of leak prevention is via the secondary seal between the brass cap and the valve body.
Anyone else had this?.
regards mark:)
chemi-cool
20-02-2004, 06:57 PM
dont use henry.
change to carly, apolo or danfoss.
they hardly leak.
chemi
Lol chemi-cool
Ever heard the saying "its like shutting the gate once the horse has bolted"
:D
chemi-cool
20-02-2004, 07:08 PM
yes,
we have our own version, it goes: לנעול את השער אחרי שהסוסים ברחו
chemi
rbartlett
20-02-2004, 07:56 PM
לנעול את השער אחרי שהסוסים ברחו
that's easy for you to say !! ;-)
cheers
richard
WebRam
20-02-2004, 07:57 PM
nuts, the babble translator just went nuts :)
chemi-cool
20-02-2004, 09:21 PM
just love XP profetional!
i
n english its: "its like shutting the gate once the horse has bolted"
chemi
Ray wheres your post gone?
Did you change your mind:D :D
Prof Sporlan
16-03-2004, 12:45 AM
dont use henry.
change to carly, apolo or danfoss.
Or Sporlan... :D
Latte
16-03-2004, 12:59 AM
No Didnt Change my mind they are still s***
Was going to edit but wasn't paying much atention and deleted instead.
Anyway Mark, Isn't it late for you, Jnr keeping you up or you on an all nighter playing with your'e ipod:D
Regards
Raymond
I-Paq actually if your going to have a joke Lol at least use the correct terminology.
:D :D :D
Latte
16-03-2004, 07:28 PM
Very Sorry, Can't keep up with all this modern technology.
I will just keep plodding along with my old 286.
Regards
Raymond
chemi-cool
16-03-2004, 07:36 PM
raymond,
remind me next year when I'll buy a new one. I will give you my "old" pentium.
chemi
Hi raymond:)
Ive sold my I-paq actually considering the palm to replace it .
;)
Latte
16-03-2004, 08:51 PM
Stop Mucking about, Just buy a laptop for the van.
I am sure you had earned enough this year to cover it :D
Regards
Raymond
I am sure you had earned enough this year to cover it
You seem to know what your talking about ray;)
Latte
19-03-2004, 09:44 PM
I sit in the slow lane in my clapped our vauxhall astra & see all you lot in the fast lane in your'e BMW's,Volvo's & Merc's
But the way you have open the flood gates with this thread, now we are looking (Mostly on roof area's) we are finding leaky valves !!!:eek:
Regards
Raymond
Hi Ray :)
Apparently,Henry supply a valve stem repair kit know.
Not that the problems recognized of course.
LOL.
Regards Mark
Latte
23-04-2004, 08:32 PM
Is this because it is going to cost them a fortune in warranty replacements or are they just thinking of the customer (REALLY)!!!!!.
Whats the latest, i hear they are going round the "M" stores trying to blame it on engineers overheating them when installing.
Regards
Raymond
Whats the latest, i hear they are going round the "M" stores trying to blame it on engineers overheating them when installing.
"Did you hear that........the henry door opening"
homelover
02-08-2004, 10:24 PM
hi Mark.
Yes we have had several leaking from the stems on brand new stores we have taken over,
We have since cut them out and replaced them.
all on R404a and several different sizes 13/8 and 15/8.
Hope this helps I assumed that had maybe they been overheated on installation , but as we did not install them it was just a guess.
Homelover,
Hi,
I allways specify another make of valve now :)
Best regards Mark
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.