PDA

View Full Version : Air Conditioning Piping



Allwyn
25-08-2008, 01:38 PM
Hi All
Please let me know how to design and connect
two evaporator units with one condensing unit with all required safety and control gear
Indoor unit 3.5 tr (2 Nos)
Condensing Unit 3.5 tr (1 No)
Drawing or a small sketch will be highly appreciated

Please use the PM facility.

Brian_UK
25-08-2008, 07:04 PM
Are you planning to manufacturer these units?

If you are purchasing this type of equipment then the manufacturer should provide installation details.

frank
25-08-2008, 07:58 PM
Hi All
Please let me know how to design and connect
two evaporator units with one condensing unit with all required safety and control gear
Indoor unit 3.5 tr (2 Nos)
Condensing Unit 3.5 tr (1 No)
Drawing or a small sketch will be highly appreciated

3.5tr outdoor and 7.0tr indoor = unbalanced system.

It won't work my friend.

Allwyn
25-08-2008, 08:02 PM
Hi
Yes it is an unbalanced system
is their no way it should work i mean
by way of capacity control

Brian_UK
25-08-2008, 08:17 PM
Are all the parts from the same manufacturer?

frank
25-08-2008, 08:30 PM
Hi
Yes it is an unbalanced system
is their no way it should work i mean
by way of capacity control

"A system is in balance when the heat rejected at the condenser is equal to the heat absorbed at the evaporator plus the heat of compression".

Anything else will:

1 - give poor performance
2 - be un-economical to run
3 - be difficult to control and maintain product/space temperatures
4 - will lead to premature mechanical failure
5 - etc. etc.

nike123
26-08-2008, 08:49 PM
"A system is in balance when the heat rejected at the condenser is equal to the heat absorbed at the evaporator plus the heat of compression".

Anything else will:

1 - give poor performance
2 - be un-economical to run
3 - be difficult to control and maintain product/space temperatures
4 - will lead to premature mechanical failure
5 - etc. etc.

Yet another classic lesson. Thanks Frank!:cool:

Allwyn
27-08-2008, 06:45 PM
Hi All
Yes Brain
all the parts from the same manufacturer.
Infact this units are installed and working
its installed in a hotel room with 2 seperate
indoor controlled by one condensing unit
their are 2 thermostat in two rooms
problem is their is always ***** leaking problem

Peter_1
27-08-2008, 08:46 PM
***** leaking has nothing to do with the setup.

icecube51
29-08-2008, 12:03 AM
how many compressors are there in the outside unit?
determen whitch one is leaking, and fix the leak.


Ice ;)