PDA

View Full Version : CO2 bulk tank evaporator



MechEng1
15-08-2008, 02:28 PM
I'm in the process of designing a CO2 bulk tank and I'm having trouble obtaining an evaporator coil. I'm close to choosing the condensing unit I want to use.

Is there a company out there that will design a coil for me based on the condensing unit and space constraints I have?

Thanks in advance!

US Iceman
15-08-2008, 05:09 PM
You might try these guys...

http://www.srcoils.com/

Bruce Scheiman
16-02-2010, 06:11 PM
I'm in the process of designing a CO2 bulk tank and I'm having trouble obtaining an evaporator coil. I'm close to choosing the condensing unit I want to use.

Is there a company out there that will design a coil for me based on the condensing unit and space constraints I have?

Thanks in advance!
I also need to have a coil design for a bulk CO2 tank. Did you ever find someone to support your need? Super Radiator could not help.

mad fridgie
16-02-2010, 08:46 PM
You can achieve as good a result using a thermosyphon system, a brazed plate heat exchanger, on the top of the tank. I have used many SWEP PHE for CO2 liquification.
Make sure vapour line enteres the vessel and not just welded to the shell. (non condesables)