Brian Crawford
10-07-2008, 06:47 AM
I am hoping someone can help me find a suitable 4 pipe floor convector (induction unit) that does not require primary air.
I have a project in Melbourne Australia that requires a few hundred 4 pipe floor convectors that must be a maximum of 350 mm wide to fit into the architectural layout of the building.
I have looked at MINB, Hidria, Sinco, Dadenco however they are all too wide or do not have adequate capacity on the cooling coil.
Can anyone recommend any other brands that I can look at.
I have a project in Melbourne Australia that requires a few hundred 4 pipe floor convectors that must be a maximum of 350 mm wide to fit into the architectural layout of the building.
I have looked at MINB, Hidria, Sinco, Dadenco however they are all too wide or do not have adequate capacity on the cooling coil.
Can anyone recommend any other brands that I can look at.