Samsung AqV12VBCN error code (not light)

[regg001]

I have a Samsung AQV12VBCN. It ran fine for the past two months (new installation). Since this morning i'm getting error messages (not light blinking) on the display. I then restart the unit and it runs fine for about an hour, then i get the errors again.

These errors are E1 01 and E2 02 . I searched left - right , top - bottom the forum and everybody is talking about leds giving errors (or signs). I don't have such - on my system it is giving error codes on the display and no one ever reported such issue.

Where can i find definition for these errors ?

AQV12VBCN seems to be a similar box as AQV12VBAN

[narkom]

Hi!
Error codes for you.

[regg001]

Hey !!! that was fast. Thanks Narkom this is really helping.

Where did you get these from. I don't have any of that information in the user's manual, nor the installation manual.

Thanks a lot...

[narkom]

I don't have any of that information in the user's manual, nor the installation manual.

Thanks a lot...

Dont mention it!

I found it in the third type of manual-"service manual" on http://www.mediafire.com/?wcbezuiyyra. Frankly speaking, I dont have deal with samsung, so I have no imagination what "1 min. Time out Communication" means :D

[regg001]

Ok thanks for the other file as well - i already had it.

Time out means lost of communication between the ''interior'' unit and the exterior.

It is caused by a loose connector on the interior unit. It is becoming loose because of the water pump some needs to install to get rid of the accumulated condensation.

The pump is vibrating thus causing the connectors to become loose.