PDA

View Full Version : Good Article



smpsmp45
11-06-2008, 08:25 AM
I could get this article.

US Iceman
11-06-2008, 01:08 PM
Thanks for sharing this smpsmp45. Overall this is very decent article. Where did you find this?

smpsmp45
12-06-2008, 04:28 AM
You might remember that we had some discussions over plate freezers / flow rates / circulation rates etc. We could get through Mr. Henry Bonner etc & had compiled this data. Ofcourse this paper was presented in reently concluded COMFEX in India

samiam
12-06-2008, 09:26 PM
Hi smpsmp45 - thanks for the concise article. A good read before my next design.

US Iceman
13-06-2008, 02:38 AM
smpsmp45,

Are you the author?

smpsmp45
13-06-2008, 06:00 AM
NO!!! It is mr. Ramesh Paranjpay, who has over 40 yrs experience in this line & has written lots of papers. He is one of the Five Fellows of Ashrae in India

Sridhar1312
16-03-2009, 02:57 AM
Author is RAMESH PARANJPEY a leading HVAC&R consultant in city of Pune Maharashtra State India

nh3wizard
16-03-2009, 02:37 PM
Thanks for sharing.

aawood1
16-03-2009, 07:04 PM
Hi Smpsmp45
Thanks for sharing this article a good read now that my main job is to train new employees on site.

CHIEF DELPAC
16-03-2009, 07:27 PM
smpsmp45 Good paper, I will use it for training of new operators in my NH3 plant . Thanks again C.D.

kingwoo4
21-03-2009, 11:17 AM
Hi Smpsmp45,Thanks for a lot your sharing the good paper.The article would give me great help. Thanks!