Mitsubishi compressor

[chillin out]

Hi guys, does anyone know what is the model number for a compressor that goes into a Mitsubishi puh-p5ygaa ?

Thanks in advance.

Chillin:):)

[Brian_UK]

Hi Chillin

According to the Mitsi book it is a ZR61KCE-TFD.

Do you want the Tech Manual emailed over? (PM me your email if you do)

[monkey spanners]

Would it be cheaper to get one from NRS/HRP than Mitsubishi?

[chillin out]

Thanks Brian, that would be great.

PM sent.

Chillin:):)

[chillin out]

@monkey spanners, it probably would. Would that make it a different model number?

Chillin:):)

[monkey spanners]

Don't know for sure:o But i fitted a replacement mitsi compressor a couple of months ago that another engineer had diagnosed and was a bit surprised to see a copeland scroll in the box from mitsubishi.
If the model numbers are the same i would think it would fit, the one i fitted also had a new compressor wiring lead as they have changed from push on crimps to loopy crimps on some models, which i didn't need, not a major problem to get over if you do though.

Just had a quick look in Nrs/climate center book and they list a ZR61KCE TFD 522 which has braze in stubs, no oil sight glass and no oil level connection, R407C, 3ph, 5hp. part no. 682460. Its also in the HRP book about 400 notes cheaper so it may be worth phoning both and see who will give the best price.

Jon

[superswill]

@monkey spanners, it probably would. Would that make it a different model number?

Chillin:):)

the model would remain the same irrespective of where purchased from