plumtech
29-04-2008, 01:12 PM
We have a roof top air conditioning unit with the following specification:
Mark: York
Model: RTH-25-B E 1 |662052583 |01008892009
Max pres.: 31bars
Indoor heat exchanger : 21.7 kw
Max testing pres. : 31bars
Fereon: R22 5.9kg
Operating weight: 355kg
3 phase 400 volt 50hz 11.1kw 44IP
The circuit board ref. is CT 1013 B made in spain
Could you please provide us with a wiring diagram for connecting the board with the internal thermostat.
Mark: York
Model: RTH-25-B E 1 |662052583 |01008892009
Max pres.: 31bars
Indoor heat exchanger : 21.7 kw
Max testing pres. : 31bars
Fereon: R22 5.9kg
Operating weight: 355kg
3 phase 400 volt 50hz 11.1kw 44IP
The circuit board ref. is CT 1013 B made in spain
Could you please provide us with a wiring diagram for connecting the board with the internal thermostat.