REFLECTS & HAYES ACCURA144 Modem

[itsok77]

HI.
This is my first time working with rack system that is installed with reflects and hayes accura 144 modem
and I`m tring to work with my computer.
What kind or things suppose to be prepared?
Does that need software or program for computer?
Or, just simply connect PC to modem with wire?
What about password things?

Thank you guys...

[750 Valve]

You need ultra site to connect to all CPC controllers, here is the link to download it (http://emersonretailsolutions.com/library/ultrasite/usdownload.asp). It needs to be installed, a site created and the correct ports setup

You also need a special cable, it can be made up pretty easily out of a 9 pin serial cable though for free, I will try to find the pinout and wiring diagram for you, while on site I prefer to remove the modem connection inside the RMCC and connect my cable there - you only see that particular RMCC this way, you can also remove the 9/25 pin serial fron the modem, throw in a gender changer and connect at that point to see the whole network