View Full Version : Gas leak monitors
IGLOO
21-04-2008, 10:54 PM
Hi all.
Could someone advise me on fixed gas leak monitors for detecting R404A in the plantroom as well as in the freezer room.Can the sensor be placed in a -40 room?
fowlie
22-04-2008, 11:08 PM
hi igloo
we use the cpc infared fixed panels and they will work in freezers and plant,their proberly the best ive seen as long as they get a proper service.also the parasense leak detectors are good plus you can get an adaptor to fit them on any prv,both work will but only if the sensor are fitted in good locations. hope this is some use
superswill
23-04-2008, 07:33 PM
we always use parasense
http://www.parasense.co.uk/parasense_products.html
always found them to be very helpful
Fatboymart
24-04-2008, 05:53 PM
Agree parasense have a good track record.
750 Valve
28-04-2008, 02:19 PM
have used the danfoss GD infra red ones, but only with co2 (although they are available in all refrigerants) and had good results, they have a low temp version as well.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.