PDA

View Full Version : Frick Quantum Panel



LEE40
24-03-2008, 10:36 AM
I Have Some Problem With The Frick Quantum Panel Ii Which Control A Screw Compressor. It Is Not Possible To See Anything In The Panel (it Is Light Blank) And The Compressor Doesn't Start.
Does Anybody Have The Frick s90-010 Fsi Pubblication Where I Suppose There Are Described Errors Of Quantum Panel?
Thank You In Advance.

NH3LVR
24-03-2008, 01:10 PM
Go to http://www.frickcold.com/Products.asp?Display=30&View=ON

They have a great deal of literature online.

LEE40
24-03-2008, 04:02 PM
Thank you!

josef
24-03-2008, 06:36 PM
Hi NH3LVR,
good connection.

VEYSEL DURLU
27-03-2008, 06:24 PM
I Have Some Problem With The Frick Quantum Panel Ii Which Control A Screw Compressor. It Is Not Possible To See Anything In The Panel (it Is Light Blank) And The Compressor Doesn't Start.
Does Anybody Have The Frick s90-010 Fsi Pubblication Where I Suppose There Are Described Errors Of Quantum Panel?
Thank You In Advance.
I had same problem in probably 2003 in several units. It was a production fault . As far as i remember the display brand was samsung and they have changed to NEC or the opposite.
Your problem might be the same.