PDA

View Full Version : Nice animation of refrigeration cycle



nike123
19-03-2008, 12:34 AM
http://www.hvacprotech.org/toc/reefer_cycle.html

Thanks to Hvacprotech member/moderator Gonefishing for leaving this open to general public.

marc5180
21-03-2008, 09:28 AM
Great animation, cheers Nike.

dsp
21-03-2008, 09:59 AM
Good One !!!

Renato RR
21-03-2008, 02:11 PM
Well done.

RR

vejai
21-03-2008, 02:23 PM
nice animation

grant
21-03-2008, 06:45 PM
wow nice one nike , good on ya

PVA
17-05-2008, 11:44 AM
Thanks, very nice

chiller-man
17-05-2008, 04:18 PM
cool animation! (sorry about the pun).

kaspastarr
21-05-2008, 11:14 PM
yh that is by far the best system animation ive seen, nice find nike
:)
64

triskelionblood
11-10-2010, 06:47 AM
very nice indeed.. can i use it for my presentation? if so, how can i download it? thanks...

oilzee
11-10-2010, 03:58 PM
thanks for sharing ...i like it so much..

desA
11-10-2010, 04:28 PM
Very nice... :)

nike123
11-10-2010, 07:34 PM
very nice indeed.. can i use it for my presentation? if so, how can i download it? thanks...

Here is download link:
http://www.mediafire.com/?367q0wz6642y89i

You need Flash file capable player (GOM media player etc..) or you could play it in your browser (Firefox, IE etc...).

Regarding copyrights, I did not found any information on that.

abet_meneses
12-10-2010, 02:58 PM
Very nice presentation on the basic refrigeration cycle.many thanks.it help a lot on those who are a starter on this field.

newbie
13-10-2010, 08:15 PM
im a starter in this field and it has helped so much.thank you

nike123
14-10-2010, 09:45 AM
If you like it, go here (http://www.refrigeration-engineer.com/forums/reputation.php?p=206215)!;)

moondawn
14-10-2010, 07:19 PM
great animation nike thank u.

quick question the oil seperator just after the compressors how does the oil get back to the compressor crank case?

cheers lee

nike123
14-10-2010, 08:35 PM
great animation nike thank u.

quick question the oil seperator just after the compressors how does the oil get back to the compressor crank case?

cheers lee
Pressure differential.;)

moondawn
14-10-2010, 09:01 PM
hi nike do you mean that it will be pushed round the system with the refrigerant by pressure?

cool runings
14-10-2010, 09:54 PM
hi nike do you mean that it will be pushed round the system with the refrigerant by pressure?


If the pressure in the discharge is 18 barG then the
oil in the seperator is 18 barG. The oil in the comp crank case is at, say 3 barG so that means there is a
pressure differential of 15 bar. That pressure will push the oil to the comp.

All the best

coolrunnings

.

moondawn
14-10-2010, 10:18 PM
hi there thanks for the reply, thank u i inderstand it better now so a low hp would hinder the chances of oil returning to the compressor as the differential pressure would become lower?

thanks for the replies guys

cool runings
14-10-2010, 11:05 PM
hi there thanks for the reply, thank u i inderstand it better now so a low hp would hinder the chances of oil returning to the compressor as the differential pressure would become lower?

thanks for the replies guys


Yes and no.

There are different ways of delivering oil to the comp.

If it is directly delivered then the differential pressure need only be 1 bar and it would still flow the oil. Pressure always flows from high to low.

Some more complex systems restrict the pressure through regulating valves and these are set to be about 5 bar above crank pressure.

There are other ways but the pressure will always be higher in the discharge.

coolrunnings

.

moondawn
16-10-2010, 11:04 AM
thanks for the post and explanation coolrunnings

Bashir01219
17-10-2010, 03:58 AM
nice one boss

james10
17-10-2010, 07:48 PM
nice one ..............

JUNDEP
26-10-2010, 05:25 AM
Thanks! Nice animation of refrigeration cycle.
I would like to copy it for my refrigeration engineering class power point presentation.

The classroom is not equipped with Real Player and could not download to my desk top computer.

Kindly help me what to do to copy animation for my power point slide presentation.

More power to you!

JUNDEP

nike123
26-10-2010, 06:41 AM
Thanks! Nice animation of refrigeration cycle.
I would like to copy it for my refrigeration engineering class power point presentation.

The classroom is not equipped with Real Player and could not download to my desk top computer.

Kindly help me what to do to copy animation for my power point slide presentation.

More power to you!

JUNDEP

http://www.refrigeration-engineer.com/forums/showpost.php?p=206215&postcount=13
http://www.gomlab.com/eng/GMP_download.html

sonic
26-10-2010, 12:40 PM
Thank u. this is bridging the gap between the diagrams in the books & the real one.
Sonic

abeon_elavungal
28-10-2010, 09:25 AM
very thanks ,it will help me to explain cycle to trainees

Egle76
03-11-2010, 07:42 AM
:eek:....well done and very interesting,thanks a lot nike!.