PDA

View Full Version : Walk-in chiller in supermarket



yazid
18-03-2008, 01:32 AM
Hi. everyone.

i have plug-in walk-in chiller in supermarket, i`ll move the condensing unit to other place, the type of condensing unit is TECHNOBLOK CSM 100 BX. How far maximum piping betwen condensing unit to evapotor unit. ?:)

nike123
18-03-2008, 08:15 AM
Hi. everyone.

i have plug-in walk-in chiller in supermarket, i`ll move the condensing unit to other place, the type of condensing unit is TECHNOBLOK CSM 100 BX. How far maximum piping betwen condensing unit to evapotor unit. ?:)
10 meters.

Samarjit Sen
18-03-2008, 01:38 PM
nike 123,

Will not the sizes of the connecting pipe change.

nike123
18-03-2008, 01:47 PM
Factory has kit with 5 m and 10 m pipes of same size. For further lengths it is necessary to make calculations.

Springbok
18-03-2008, 09:21 PM
Hey yazid.Most suppliers supplying monoblock units do insist on keeping the extended pipe run to a minimum,that is if its necesary to extend.As far as I know,it is usually 5 - 10 meters,but best to check with the specified manufacturer just too be sure.Especially if your ambient temp will be high..:D

yazid
19-03-2008, 02:39 AM
Thanks. everybody

I plan to move the condensing unit +/- 10 meters from the evaporating cabinet, but i`m worry bad possibility created because the system old enaugh. somebody heve idea? or somebody have technical catalogue for Technoblok unit?