help plz

[kakato]

hi guys i am a student and i am making air cycle refrigeration system. and i got a compressor and i need help to calculate its volumetric flow rate plz any body help me
the compressor information is
Power: 0.25hp
model:- danfoss
S.n:-TL3B
8024928
plz that is all the data i got i need help

[The Viking]

Kakato,

You will find all the information you need at www.danfoss.com.

If you search their site for "TL3" then you will be able to download the full spec, the TL3B is old, I believe, but the data you are after will be the same for the modern ones (-G / -F).

Happy hunting,

[Brian_UK]

I think that the TL3B is actually a reference for the start relay or the Klixon from what I could find on their site, none of it was in English which didn't help me much ;)

[The Viking]

Well, the TL3 bit indicates a compressor with a 3.13 cm3 cylinder volume.... the rest I don't know...sorry

[nike123]

This is what danfoss software have about TL3G 220V 50Hz:
http://www.mediafire.com/?y1mjemmt3cd

[kakato]

thanks peple put i oly need 2 know the rpm

[The MG Pony]

Hmmm didn't racall the formula.

but it is some thing times hertz then divided by some thing.

[nike123]

Hmmm didn't racall the formula.

but it is some thing times hertz then divided by some thing.


N=f x 60/2P

N number of turns
f frequency of power supply
P number of poles

Then you need to ad slip in that calculation

[nike123]

thanks peple put i oly need 2 know the rpm

I think it is 1410 rpm for 50Hz nominaly, but I am not sure!

[kakato]

thanks for help any way