PDA

View Full Version : Airedale Cus10



C_Henderson
28-02-2008, 11:12 AM
Hi, i have 3 airedale condensing units, all with no model/serial number and no other details at all except its compressor is a maneurope 160p. i think they are either CUS10's or CUS12's...

could anyone give me as much info about these units as possible. pictures would help to if available. thanks.

sgrmarley
29-02-2008, 12:21 AM
Hiya chances are that 160 p Maneurop is the oil type.

What do you want to know??

R1 usually means cooling signal active, R3 usually fault relay. Only got HP, LP, and some have discharge gas temp stat. They really are quite simple units with not much that can go wrong.

nike123
29-02-2008, 12:28 AM
This is technical manual:
http://tinyurl.com/3cfefc

C_Henderson
29-02-2008, 06:18 PM
just wanted to know what they were really. we are moving the 3 condensers and AHU, and the client wanted to keep some info on them and it would be helpful for our O&M manuals too. after finding an old airedale catalogue (the same as the link nike123) gave, i found they were CUS12's n got all the info i needed.
Thanks for the help!