cool#9
20-02-2008, 08:11 PM
Hi everyone, how are you ?
I found a standard compressor down to earth on a TOSHIBA MM_A0240 HT + MM_A0240 HX / R407C.
On the master unit the INVERTER and the STANDARD COMP are in the same casing... but only the STANDARD is down to earth, 0 ohm...
I do not have much experience on these units and maybe somebody could help ?
I set the system to run under emergency operation until i find the compressor for my customer...
I never change this kind of "double" compressor and i hope somebody will give advises to do it as well.
Kind regards
cool#9
I found a standard compressor down to earth on a TOSHIBA MM_A0240 HT + MM_A0240 HX / R407C.
On the master unit the INVERTER and the STANDARD COMP are in the same casing... but only the STANDARD is down to earth, 0 ohm...
I do not have much experience on these units and maybe somebody could help ?
I set the system to run under emergency operation until i find the compressor for my customer...
I never change this kind of "double" compressor and i hope somebody will give advises to do it as well.
Kind regards
cool#9