View Full Version : refrigeration software
Hallo Abdulazman,
You talk about an refrigeration software ( Sabroe Techmaster). I'm interested if this software can help to calculate the liquid separator capacity for NH3 plants.
Best regards,
Mihai
TXiceman
07-01-2008, 05:07 PM
Are you asking about retention volume or separation/velocity capacity?
I have never found a program that I would trust to calculate separation data. I prefer to do it the old long hand method.
Ken
TXiceman
29-09-2008, 05:52 PM
The problem with softwear is how well the programer knew his business and if he placed the proper stops in the program.
I do not recommend that you depend on someones unknown softwear to design a separation vessel unless you know in advance how to design it yourself. Ther are just too many varriables here to consider.
Ken
Magoo
29-09-2008, 10:22 PM
I agree with TXiceman. That there are too many variables to consider, and would recommend a system manufacturer for advise. But if you can access the York design program it would be half helpful only if you know the pitfalls.
magoo
baskaran
26-11-2008, 08:07 PM
I am problem in my system, the system running for -10 deg and -40 deg how can i separate the oil from the system, the refrigerant using R22
THE SURGE DRUM volume is 6tons each where i trap vessel for oil rectification
baskaran
26-11-2008, 08:10 PM
How can i select the plate heat exchanger parallel flow or counter flow which one more efficient, i seen may of the industry the using parallel flow PHE for eveporator pls give me the proper technical reason?
omarzyead
05-03-2009, 08:40 PM
thank uuuuuuuuuuu
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.